How to remove scratches from a metal surface?

How to Remove Scratches from Metal and Plastic Laptops - October 22, 2021  Keyboard Kings

Scratches on your metal surface can be a little annoying. They can change the whole look and feel of it and make it seem a lot older. And sometimes, no matter how much you try to buff them out or get rid of them, they never leave completely. In this article we will tell you how to remove scratches from a metal surface, so you can get back the smooth look and feel your surface had.

There is a lot of work and time that goes into restoring your metal surface back to its original look, but it can be done. You just need to know where to start. Here are the top ways how to remove scratches from a metal surface.

1) Use grinding machine

If you have some stubborn scratches on your metal surface, it may be best to try using a grinding machine. Don’t worry, these are very easy to use, and they don’t take up much space. Just make sure you have the proper safety equipment on before using this. To use, all you have to do is start the machine and let it run on low speed. Next, move it across your metal surface in a back and forth motion until you have removed the scratches. Make sure you check often to see if all your scratches are gone, and make adjustments as needed.

2) Wet sand

Wet sanding is another way to remove scratches from your metal surface. The first thing you need for wet sanding is a bucket of water, or some other type of liquid. This is used along with your 800 to 1000 grit sandpaper to get the job done. With wet sanding, you will use your sandpaper and rub the metal surface until the scratches are gone. This is a very time consuming method, so it may not be for everyone.

3) Buff the surface with polisher machine

Scratches on your metal surface can be left behind by using a polisher machine. If you do not have the proper safety equipment, please do not attempt to use this method. To fix your metal surface, you will need a good polisher machine. You will need to go over the surface with a high speed buffer. While doing this, you will need to watch for scratches. Make sure you go over them multiple times until they are completely gone.

4) Use rubbing compound

Rubbing compound is very useful for restoring your metal surface. The rubbing compound will use an abrasive polish to remove the scratches on the metal surface. First, make sure you wet the area where your scratches are. Then take rubbing compound in your palm and apply it to the metal surface. Next, rub back and forth to get your surface looking shiny and new. This method is very simple and easy to use. You can find rubbing compound at your local hardware store or online.

5) Use touch up paint

If you have some minor scratches, you can use touch up paint to fix them. Just go to your local hardware store and pick out a matching paint color. Then go home and use a small brush to paint the scratches with your matching color. This is another simple method, but it can be very effective.

Putting these methods together on how to remove scratches from a metal surface can make for great results. Just be sure you know what kind of metal surface you are working with before attempting any of these methods.