Bothered by WiFi connectivity issues with your Netgear range extender? Not anymore! This post is the ultimate guide to help you get rid of the WiFi connectivity problems in a jiffy. Here, we will put the limelight on different connectivity issues with your Netgear wireless extender along with their instant fixes. Let’s get the ball rolling.
Fixed: WiFi Connection Problems With Netgear Extender
Problem 1 – Netgear Extender’s SSID Not Detected
On the off chance if the SSID of your Netgear wireless range extender is not detected, you need to install your extender using a wired connection. For this, you need to use the setup wizard. Here’s how:
- Visit www.mywifiext.net web-based setup page through an internet browser.
- Enter the asked details and hit Log In.
- Followed by it, choose the Setup Wizard option.
- Now, click on the radio button that says Manually Input My Wireless SSID.
- Insert the SSID.
- Type the passphrase and hit Continue.
- Click on the Ok button.
- Scroll down to the bottom of the screen, check the box, and click on the Continue button.
- Hit Finish.
Once done, check whether your Netgear extender’s SSID is now detected or not.
Problem 2 – Main SSID Not Detected By the Extender
If this is the issue with you, walk through the following troubleshooting tips to get it fixed immediately:
- Keep your WiFi range extender in the same room as that of your existing router.
- Power cycle your extender as well as the router.
- In case still the SSID is not detected, change the WiFi channel of your extender via the Netgear Genie setup page.
Problem 3 – Extender Connected But No Internet Access
Connected to Netgear extender but unable to access the internet? Fret not! Check out the below-highlighted steps to troubleshoot the problem:
- Reboot your Netgear range extender, router, modem, and other connected devices.
- Check and update the hardware drivers of connected devices, if needed.
- Be sure that all LEDs on your extender are glowing.
- Disable the VPN or proxy server if using.
- Turn off the security software on your PC, Mac, or mobile on a temporary basis just to confirm whether any one of them is preventing internet access.
In this manner, you can get internet access after connecting to the Netgear extender.
Problem 4 – Connecting to the Main Router Failed
My extender is failed to connect to the main router. What should I do? – Is the same question annoying the heck out of you? Gotcha! Here’s the solution to this problem – Verify if the Access Control List or ACL of the main router is enabled. If so, disable it or add the MAC address of your Netgear wireless extender to it.
Note: In the event that you don’t know how to access the ACL list of your router, check the manual that came with the purchase. However, here, we are using a Netgear router as an example.
- Access an internet browser, be it Microsoft Edge or Google Chrome.
- Log in to your Netgear WiFi router.
- Make a way to the Wireless Settings > Set up Access List option.
- Next, uncheck the option that reads Turn Access Control On to allow your Netgear range extender to connect to the router.
- On the off chance if Turn Access Control On option is checked and you wish to use this feature, add the MAC address of your Netgear range extender.
- Hit the Add button to add your extender’s MAC address.
- In case you are done with the Netgear EX2700 setup in your home, enter a unique name for your extender under the Device Name section and then its MAC address.
- Thereafter, click on the Add button to save the settings.
And there you are! Now, you can easily connect your Netgear WiFi range extender to the existing home router without any hassle.