Details About Wavlink AC1200 Extender

With the assistance of the Wavlink AC1200 extender configuration, you will easily extend the range of the router in less time. On this page, you will study the configuration process of the Wavlink AC1200 extender.

Let’s start the process!

How Does A Wavlink AC1200 Work?

The primary application of the Wavlink AC1200 dual band range extender is to increase the range of the extender at your home or place of business. It helps to eliminate all the dead zones in homes and workplaces where you experience poor WiFi. The Wavlink AC1200 setup is quite similar to the Wavlink WiFi extender installation.

Unbox Your Wavlink Extender

First, the Wavlink AC1200 packaging contains either an extender or a lengthy ethernet connection.

Note: Remember that WPS requires a location where the WiFi signal can be disrupted only slightly. You can configure the Wavlink WiFi range extender in two simple ways: using a WPS button or a mobile device. 

Important Conditions For Configuration

  • Having a router and an extension is the first and most important need.
  • Now, enter your SSID and password on the Wavlink extender’s login page.
  • Finally, access your computer or mobile device’s browser from any of them.

Note: Before completing the Wavlink AC1200 WiFi extender’s configuration. In order to access the Wavlink extension, you must first log in. If you are unsure how to accomplish this, follow these steps. 

How To Do The Login Process?

  • First, connect a PC or a mobile device to your wavlink WiFi extender.
  • Now, connect your wavlink extender to WiFi using a computer, laptop, smartphone, or PC.
  • After that, locate the Wavlink_EXT network in your mobile phone’s list of WiFi networks and connect it to an extender WiFi network using your mobile device.
  • After that, launch your device’s web browser and type AP setup Wavlink in a web browser’s HTML box.
  • Following all of this, a Wavlink extender login page will appear on your screen.
  • Now, enter all the information requested about them in the appropriate fields.
  • As long as, you can now swiftly modify a Wavlink Extender’s settings. Like WiFi channels, frequency ranges, internet speeds, etc.

How To Set Up A Wavlink AC1200 Extender

There are two approaches through which the Wavlink AC1200 extension may be configured quickly and easily.

  1. Through WPS Key
  2. By Ethernet Cable

Link Extender to Router WPS Connection

  • First, insert the Wavlink AC1200 extender’s power plug into the wall socket.
  • Ensure that your router and extender are located in the same room. Do not place them in different rooms.
  • Now activate the extender’s WPS button.
  • Alternatively, simply hit the router’s WPS button inside in 2 minutes.
  • Ensure that the WPS function is supported by your router. You can attempt the second technique instead of this one if your router does not support the WPS capability.
  • When both devices’ solid blue LED lights turn on after you push the WPS button on either one of them, this indicates that the connection between them has been made. 

Connection Between Extender & Router By Ethernet Cable

  1. You must connect an Ethernet cable right away to the extender’s ethernet port.
  2. Connect the router’s ethernet port with the remaining end of the Ethernet cable at this point.
  3. Check that your router and PC are connected before attempting this.
  4. Now remove the extender’s power plug from the wall socket.
  5. Wait for the LED light to finally get stronger and solid blue after two to three minutes.
  6. Your extension successfully attaches to the router as a result.

Note: If you run across any problems while setting up the Wavlink AC1200 extension.

Reasons People Experience This Type Of Problem

  • The WiFi connection is not functioning as it ought to.
  • The router and your extender are not in the same room.
  • The Wavlink extension is unable to connect to the router’s signal.
  • A wavlink WiFi extender’s power plug does not flip over properly.
  • The Wavlink AC1200 extension does not include a blinking orange LED light.

After reading these few explanations, you will understand why users encounter problems when using the Wavlink AC1200 Extender. Now that you are aware of the issues’ solutions.

Fix Wavlink Extender Setup Problem

  • Examine each electrical connection.
  • Update the Wavlink extender’s software to the most recent version.
  • Reset the Wavlink Ac1200 WiFi extender’s power.
  • Check the status of the modem and router.
  • Verify the extender and router’s range.
  • Place the Wavlink AC1200 Extender in a different location. 

Tip: Therefore, we hope that your wavlink extender setup problem is now resolved after attempting all of these tips. If the issue persists, you may also upgrade the router’s firmware. If you’re unsure how to do this, see the Wavlink AC1200 router manual and read the directions.

You may quickly and easily know every important detail about the Wavlink AC1200 extension to a router after reading this page. Keep an eye on this post for new information.