travertine tile floor
travertine tile floor

Whenever you think about building or renovating any space, you have to take care of the major aspects first. Roofing, flooring, walls, lighting, and plumbing are some of these major aspects. Once these are taken care of, you can move to other aspects like furniture and décor.

Flooring is an important element that affects the functionality and aesthetic appeal of any place. Whether the space is – small or large, residential or commercial, – the floor must be durable, strong, and beautiful. Different types of flooring are available in the market. Depending on the type of flooring you choose, you can get numerous options.

If you decide to go with tiling, let us tell you about the travertine tiles. They are one of the several types of tiles used for flooring. Travertine tiles are increasing in demand across Australia due to their benefits. They can be used for both indoor and outdoor applications. The fact that you are reading this blog post proves that you must have made up your mind about using travertine tiles in your house or workplace. You must be planning to treat it as a DIY (Do It Yourself) project.

Therefore, we have created this comprehensive guide on how to install travertine tiles. The guide contains simple-to-understand steps that you can carry out without the help of an expert. But before that, let’s see in a nutshell what exactly are travertine tiles.

What are Travertine Tiles? What are they Made Of?

Travertine tiles are a type of stone tiling material. As the name suggests, they are made of travertine, which is a form of terrestrial limestone. Travertine gets deposited around mineral springs, especially hot springs. This terrestrial limestone is created because of the precipitation of calcium carbonate, which is known as calcite.

Since travertine is a quite durable stone, travertine tiles are one of the most widely used stone tiles in the world. They can handle heavy foot traffic and withstand wear and tear. You can buy travertine tiles of your choice by considering factors like color, size, design, and texture. You should consider the same factors while buying travertine pavers. Travertine pavers have a few differences compared to travertine tiles. While tiles are suitable for indoor applications, pavers are suitable for outdoor applications.

How to Install Travertine Tiles or Pavers? Read All the Steps Here

  • Check and Prepare the Surface

Travertine tiles are also laid on walls, but since, here we are talking about flooring, the surface we are referring to is the floor. You need to check whether the floor is even, i.e., levelled and flat. You can start by removing the older floor covering. If you notice any cracks or uneven areas, you must fix them before laying the new flooring. You can use a floor levelling compound to level the uneven areas.

  • Gather all the Tools You Might Need

You should be ready with all the tools that you mind need to finish the task of installing travertine tiles on the floor of your residential or commercial place. A power drill, a wet saw, a mixing paddle, a tapping block, a margin trowel, a notched trowel, a rubber mallet, a grout float, a marker, a tape measure, a chalk line, and a torpedo level are some tools that should gather. When you go to buy travertine tiles, you should also buy the required tools.

  • Plan the Layout of the Tiles

Laying tiles or pavers before installing them is necessary to avoid making mistakes. Lay a row of lines on the floor along the gridline. Have a look at the tiles to ensure getting the desired appearance for the flooring. Rearrange the tiles, if required. Now remove the tiles but remember the layout.

  • Apply Mortar to the Surface

Mix mortar and spread it on the floor with the help of a notched trowel. You need to spread mortar in small amounts or batches so that it does not dry out before installing the tiles. Now, set the tiles by keeping spacers between them. Spacers would help to preserve grout lines. Once the mortar dries out, remove the spacers.

  • Fill the Openings with Grout

Take white grout and mix it with water to form a thick paste. Fill the openings between the tiles with the grout. Use a grout float to rub the grout into the joints diagonally. You should remove the excess grout from the flooring to give it a clean finish. Take a damp sponge and remove excess grout from the surface of the tiles. Let the grout cure for some time. In the end, apply a travertine tile and grout sealer.

Wrapping Up

You can install travertine tiles and travertine pavers easily on the floor and walls of your house, office, warehouse, or any other place by following the steps mentioned above. Now you just have to buy travertine tiles or travertine pavers, mortar, white grout, and some tools. We hope that you would have liked reading this blog post.