Prevent fraying as you stitch by employing a temporary or permanent edge finish on your embroidery fabric. The method usually doesn’t take very long, but it makes stitches easier, as you will not have pesky thread fabrics within the way as you’re employed.

Some of these require a stitching machine (or a lover who has one), while others need only a couple of basic supplies to make a foothold by hand. Choose the tactic that works best for the embroidery project you’re performing on.

Before edge-finishing your embroidery fabric, remember to chop away the selvedge from the material. This self-hemmed fabric edge is thicker and may cause the tambour to not fit well, and therefore the selvedge has little or no give.

Borders make a superb frame for a stitched phrase or as to how to end off a smaller motif. 

All you would like to try to do is look at a number of your favorite stitches (or perhaps a couple of new ones you would like to learn) and put them together. It only takes two or three different stitches and an entire new border design appears.

A line of stitches looks great running along the hem of table linens, dish towels, and lots of other items. you’ll also work most of the designs on a curve.

Edge Taping

Edge taping is usually used for needlepoint and is safe to be used on needlepoint canvas.

Use artist’s tape, folding it around the edge. masking paper also will work, but it is not ideal.

It’s best to use this method only on embroidery projects which will have the sides trimmed away later. The tape is often difficult to get rid of from fabric and may leave a residue.

Seam Sealant

Seam sealants—such as Fray Check from Prym Dritz or Fray Block from June Taylor—are liquid glues to secure the sides of the material and stop fraying.

This helpful supply is often used on any embroidery fabric and dries clear. These are both mechanically cleanable and dry cleanable although in many cases this temporary edge finish is going to be trimmed away.

Fringed Edges

In addition to preventing fraying, it’s pretty too, which suggests you’ll be wanting to go away this finish in situ on your embroidery. In fact, you’ll use a special technique to guard the material edge while you’re employed, then add this at the top.

Hemming

Some items that you simply stitch would require hemmings, like napkins, placemats, and tablecloths. It is best to hem the material for these before working the embroidery to surround the raw edges and provide a finish that handles laundering well.

Choose your favorite hemming method either by hand using the hemstitch or rolled hem or by machine employing a double-folded hem, serging the sides, etc. For a quick finish, try iron-on or press-on tapes designed for hemming without sewing.

This method also will prevent time when the project has been completed, by not having to figure it out later.

Bias Binding

Some stitchers like to bind the sides of their fabric with bias binding, completely enclosing the raw edges of the material. This is often very true with large-scale pieces which will require tons of handling.

Single- or double-fold bias binding tape are often pre-purchased in three-yard packages, otherwise, you can make your own.

This binding can easily be removed employing a seam ripper after the embroidery has been completed. Or leave it in situ for a permanent finish that’s bound, almost like a quilt.

Pinked Edges

Use pinking shears to form a zigzag-cut edge around the embroidery fabric which will resist fraying. Follow the grain of the material as you narrow or pre-mark straight lines on all of the sides.

Some fraying will still occur, but it’ll be minimized by using this sort of scissors referred to as pinking shears.

Overcasting

If you’ve got a stitching machine, overcasting may be fast and straightforward thanks to secure the sting of the material. In fact, you’ll even see this sort of edge finish on packaged embroidery fabrics that come pre-cut and finished.

Select the essential zigzag stitch on your machine and adjust it in order that it’s slightly wider than the default setting for the simplest results.

You can also overcast the material edges using an overlock stitch on your serger.

Whichever method you select, make certain that the stitch covers the raw edges of the material. The stitching must enclose the fibres along all sides of the material to stop fraying.

On dark or silky fabrics, the seam sealant could also be noticeable after it dries, so make certain to see in a not noticeable area before using it if the merchandise won’t be trimmed after completing the project. 

Conclusion

These are some of the best edge finishes for embroidery fabrics. If you have any questions about the topic or anything related to logo digitizing, feel free to reach out to us at Migdigitizing.

LEAVE A REPLY

Please enter your comment!
Please enter your name here